Inclinometers/Tilt Sensors

Geonor, Inc - Precision Instrumentation

Digital MEMS Inclinometer System

geonor_rst_Digital_MEMS_Inclinometer_SystemWith a new minimum negotiable casing radius of 1.93 m, RST’s Digital MEMS Inclinometer can still traverse a smaller radius bend than all other inclinometers available in the industry. RST’s Digital MEMS Inclinometer Probe has an industry leading system accuracy of ± 2 mm per 25 m.

 More Info>

Digital MEMS Inclinometer Spiral Sensor

geonor_rst_Digital_MEMS_Inclinometer_Spiral_SensorThe Digital MEMS Inclinometer Spiral Sensor is used to determine down-hole helical deformation of installed inclinometer casing.

 More Info>

In-place MEMS Tilt Meter

geonor_rst_In_place_MEMS_Tilt_MeterIn-place MEMS Tilt Meters measure tilt in either one or two axial planes perpendicular to the surface of the base plate.

 More Info>

Probe Style In-place MEMS Inclinometer

geonor_rst_Probe_Style_In_place_MEMS_InclinometerStandard in-place inclinometers may not be able to track in casings deformed by active ground movement. The Probe Style In-place MEMS Digital Bus Inclinometer has tracking equal to the best standard probe inclinometers.

 More Info>

Horizontal MEMS Inclinometer

geonor_rst_Horizontal_MEMS_InclinometerThe Horizontal MEMS Inclinometer from RST Instrument Ltd. measures settlement or heave under embankments, dams, roadways, storage tanks, and landfills.

 More Info>

Horizontal In-place MEMS Inclinometer

geonor_rst_Horizontal_In_place_MEMS_InclinometerThe In-place Horizontal MEMS Inclinometer is designed to remotely monitor, and continuously measure, underground vertical movement as a result of construction and excavation and any settlement that may occur around tunnels, dams, embankments and landfills.

 More Info>

Inclinalysis Software

geonor_rst_Inclinalysis_SoftwareRST Inclinalysis™ Software is a powerful companion to the RST Digital Inclinometer System. It allows the user to quickly and efficiently reduce large volumes of inclinometer data into a variety of formats suitable for analysis and presentation.

 More Info>

Inclinometer Casing

geonor_rst_Inclinometer_CasingInclinometer Casing is suited to be installed in boreholes, piles, set into concrete or attached to structures. The casing serves as an access tube to guide a servo accelerometer based probe in the two orthogonal directions of measurement. Changes in the output of the probe caused by the deformation of the casing, is proportional to the sine of the angle of inclination of the long sensor axis from vertical.

 More Info>

Inclinometer Casing – Telescopic

geonor_rst_Telescopic_Inclinometer_CasingTelescopic Inclinometer Casing is mainly used in embankments where the casing will be subject, either locally or along its full length, to large amounts of settlement, typically more than 1%.

 More Info>

Inclinometer Casing – Anchor

geonor_rst_Inclinometer_Casing_AnchorInclinometer Casing Anchor is affixed to the bottom of the inclinometer casing prior to inserting it into the drill-rod/borehole. As soon as the anchor exits the bottom opening of the drill-rod / borehole, the spring-loaded arms of the anchor are automatically extended to grip the borehole/duct wall.

 More Info>


Digital Tilt Logger

geonor_rst_Digital_Tilt_LoggerThe Digital Tilt Logger is a low cost, battery powered data logger and tilt meter in a single, compact unit. It measures tilt in either one or two perpendicular axes in the plane of the base.

 More Info>

In-place MEMS Vertical Inclinometer

geonor_rst_In_place_Vertical_MEMS_Inclinometer_SystemIn-place Vertical MEMS Inclinometer Systems are designed to measure lateral movement of soil and rock or deflection of man made structures such as piles or retaining walls, when remote and continuous monitoring are required.

 More Info>

Portable MEMS Tilt Meter

geonor_rst_Portable_MEMS_Tilt_MeterMEMS Tilt Beams measure differential movements in structures and consist of a MEMS sensor mounted on a rigid, fiberglass beam. The beam is then mounted on anchor bolts set into the structure.

 More Info>


MEMS Tilt Beam

geonor_rst_MEMS_Tilt_BeamMEMS Tilt Beams measure differential movements in structures and consist of a MEMS sensor mounted on a rigid, fiberglass beam. The beam is then mounted on anchor bolts set into the structure.

 More Info>

 

Profile Monitoring System for Tunnel Concrete Segments

geonor_rst_Profile_Monitoring_for_Tunnel_Concrete_SegmentsThe RST Profile Monitoring System for Tunnel Concrete Segments is a series of tilt meters, fixed to the tunnel wall on each of the precast concrete segments erected in place as tunnel lining by a Tunnel Boring Machine (TBM).

 More Info>

Track Monitoring System

geonor_rst_Track_Monitoring_SystemThe Track Monitoring System is intended for monitoring settlement and twist of railroad tracks which may be affected by nearby construction activity, such as tunneling or adjacent excavation, or which are located near hazardous zones such as potential washout or landslide areas.

 More Info>