H-10 Field Vane Shear Borer

Geonor, Inc - Precision Instrumentation

Overview

geonor_h10_field_Shear_Vane_BorerThe Geonor H-10 Field Vane Shear Borer is a fully protected, pressure push-in, field vane instrument.

No rod-soil friction is possible due to its tube-protected rods. No need either to check the vane, nor to clean it between each shearing (clay adhering to the vane may increase its area ratio considerably).

The protection shoe of the Geonor H-10 not only protects the vane but also cleans it automatically before each measurement. The shoe is particu­larly useful for testing in stratified, sandy, stony and marine sediment clays

Features

  • Detailed field investigation of undrained shear strength and sensitivity of soft and medium stiff clays
  • From 0 to 30 meters by hand jack, even through hard layers of clay, sand or silt
  • Two vane sizes. Measurement range from 0 to 60 kPa and 0 to 100 kPa
  • Top-level accuracy results, can be used for the design of earth fill foundations and embank­ments

Technical Specs

  • Installation: Pressure push-in, no hammering. By hand with the Geonor ground-anchored jacking system or with a hydraulic drilling rig.
  • Instrument: Gear driven, accuracy of torque reading: + – 0.5% of range.
  • Measurement range: From 0-60 kPa (0-6 T/m2) and 0-100 kPa (0-10 T/m2).

DATA SHEET

View PDF Datasheet below. Some browsers do not support this function, you can Download Here.