With a new minimum negotiable casing radius of 1.93 m, RST’s Digital MEMS Inclinometer can still traverse a smaller radius bend than all other inclinometers available in the industry. RST’s Digital MEMS Inclinometer Probe has an industry leading system accuracy of ± 2 mm per
25 m.
MORE INFO
The Digital MEMS Inclinometer Spiral Sensor is used to determine down-hole helical deformation of installed inclinometer casing.
In-place MEMS Tilt Meters measure tilt in either one or two axial planes perpendicular to the surface of the base plate.
The Horizontal MEMS Inclinometer from RST Instrument Ltd. measures settlement or heave under embankments, dams, roadways, storage tanks, and landfills.
RST Inclinalysis™ Software is a powerful companion to the RST Digital Inclinometer System. It allows the user to quickly and efficiently reduce large volumes of inclinometer data into a variety of formats suitable for analysis and presentation.
Inclinometer Casing is suited to be installed in boreholes, piles, set into concrete or attached to structures. The casing serves as an access tube to guide a servo accelerometer based probe in the two orthogonal directions of measurement. Changes in the output of the probe caused by the deformation of the casing, is proportional to the sine of the angle of inclination of the long sensor axis from vertical.
In-place Vertical MEMS Inclinometer Systems are designed to measure lateral movement of soil and rock or deflection of man made structures such as piles or retaining walls, when remote and continuous monitoring are required.
MEMS Tilt Beams measure differential movements in structures and consist of a MEMS sensor mounted on a rigid, fiberglass beam. The beam is then mounted on anchor bolts set into the structure.
MEMS Tilt Beams measure differential movements in structures and consist of a MEMS sensor mounted on a rigid, fiberglass beam. The beam is then mounted on anchor bolts set into the structure.l.
The RST Profile Monitoring System for Tunnel Concrete Segments is a series of tilt meters, fixed to the tunnel wall on each of the precast concrete segments erected in place as tunnel lining by a Tunnel Boring Machine (TBM).
MORE INFO
The Track Monitoring System is intended for monitoring settlement and twist of railroad tracks which may be affected by nearby construction activity, such as tunneling or adjacent excavation, or which are located near hazardous zones such as potential washout or landslide areas.
MORE INFO
All Rights Reserved | Geonor, Inc.